SAME DAY GARAGE DOOR SERVICES
Helpful Tips To Upkeep Your Garage Door & Increase Its Lifespan
10-Step Routine On How To Properly Take Care Of Your Garage Door
Do you check your garage door regularly? Most people do it only once every few years, but that’s exactly what you should avoid. A twice-a-year seasonal inspection is all you need to maintain your garage door in good condition.
Garage door maintenance is normally overlooked, but a good seasonal inspection can help you save a lot of money from an expensive repair bill. To help you with this inspection and maintenance process, we have created this 10-step routine that you can follow. Read below and learn how to properly take care of Gilbert garage doors.
Step 1: Check Your Door In Operation
The first thing you should do is to watch and listen to your garage door while operating. Jerky movements and scraping sounds are usually indicators of problems. A well-maintained garage door is relatively quiet while moving, and it should not move weirdly at any time.
Remember to check the springs, pulleys, and cables to ensure they are in great condition as well.
Step 2: Clean The Tracks When Necessary
Tracks get full of debris and rust easily, so check them on both sides to make sure they are free of all these elements. You can use a level to make sure the tracks are perfectly vertical and make small adjustments if necessary.
For major track repairs, contact a professional technician.
Step 3: Tighten The Garage Door Hardware
The garage door moves up and down many times a year, so the motion can loosen up the door, creating some damage to the hardware. You can check the brackets holding the door tracks to the ceiling and walls to make sure they are working properly.
If you have a socket wrench, use it to tighten up any loose parts you find.
Step 4: Check The Rollers
A Garage door repair service in Gilbert is necessary to replace some parts in the garage door, but the rollers are not one of them. Most rollers can be removed by simply releasing the brackets and holding them to the door. Therefore, you can check the rollers yourself to see if they need a replacement.
You should inspect the rollers at least twice a year, and replace them every five to seven years. You have to replace any rollers you find that are cracked or worn out.
Step 5: Do Not Forget About The Cables & Pulleys
Do a meticulous inspection of the lift cables and pulleys that join to the bottom roller brackets on the garage door. These items connect the springs to the door to help lift and lower the door without any issue.
You may already know that garage doors have two kinds of springs: extension springs and torsion springs, and both types use special cables to lift the garage door.
Garage door technicians recommend only checking if these parts are working properly, but that’s it. You should not touch cables and springs because they are dangerous due to their high tension.
If you see any broken strands or other signs of damage on the cables, contact a garage door repair service in Gilbert for help.
Step 6: Lubricate Moving Parts
Keep moving parts well-lubricated to reduce pressure on the rollers and door openers. You can apply a premium spray lubricant on the hinges and rollers at least twice a year. Use a penetrating solution in spray if the hinges or rollers seem stuck, and then wipe them out and apply grease.
Step 7: Check The Garage Door Balance
Your garage door should be properly balanced to last longer. To test this, pull the release handle on the automatic opener and manually lift the door until it stays halfway open. The door should remain there without help, otherwise, it’s having a problem with the balance.
Step 8: Take A Look At The Auto-Reverse Feature
The auto-reverse feature was created to stop and reverse the direction of the door if it detects something in the path of the door. To test it, simply place a scrap 2×4 board flat on the ground, making sure that it is on the same path as the door. If the door comes down and touches the board, it should go back up again.
Step 9: Replace The Weatherstripping
The rubber weatherstripping allows Glendale garage doors to stay safe from dust, dirt, and extreme climate conditions. Do not forget to check it twice a year to make sure it is in good condition.
If your garage door has weatherstripping along the sides, check its condition as well just in case you need to reattach any loose spots.
Step 10: Paint The Door
Your garage door’s appearance is also important! Check it well to see if there are signs of steel or rust spots that need painting. Be particularly cautious with wooden doors, as water damage is very common for them.
Contact Professional Services If You Need Better Help
Feel free to contact a top-rated garage door repair service in Gilbert for things that get out of your hands! You can always call Same Day Garage Door Services to receive a trusted garage door installation or repair. Contact us now to receive a no-obligation estimate so that you can increase your garage door lifespan!
Same Day Garage Door Services, LLC
Email: samedaygaragedoorservices@gmail.com
Website: https://samedaygaragedoorservices.com/
Gilbert Location:
2594 E Thornton Ct
Gilbert, AZ 85297
Phone: 480-800-0252
Tempe Location