
greater Phoenix metro
Garage door track repair before it derails
A bent, loose or out-of-line track makes the rollers bind. Upon arrival, the technician will safely assess the needed repair and will present a detailed quote.
What Happened?
Please click for further details.
As fast as same day for qualifying services, Monday to Saturday.
- 5.0 on Google, across 5,400+ reviews
- 4.8 on Yelp
- Licensed, bonded and insured · AZ ROC 308754 and AZ ROC 349928
- 30,000+ jobs since 2016
What not to do
Do not keep running a door that is binding
A door that catches, shudders or scrapes is loading every other part while it does it. One failed roller becomes three.
Do not hammer the track straight
The track sets the line the whole door runs on. A section knocked further out of line can let the rollers out, and then the door comes off.
Leave the bottom bracket alone
It looks like a loose bolt. It holds the cable under the spring's tension, and undoing it by hand is how people get hurt.
What it costs
From $160
Track and roller labor
The base labor rate, before parts
$69
Service call
Charged when a technician is dispatched to diagnose. Waived when you go ahead with a repair (parts and labor). No charge on a warranty visit.
Whether the track can be straightened or a section needs replacing decides most of the total. Rollers are sold per set. You get the figure at your house.
How the repair works

Step 1
Call or book
Tell us what it sounds like and where it catches. Phone calls answered 24/7. If we miss you during service hours, we call back in under 10 minutes.

Step 2
Checked and quoted
The technician runs the door, checks the whole track and every roller, shows you what has worn, and gives the price before starting.

Step 3
Straightened and tested
Track straightened or replaced, brackets tightened, worn rollers swapped, and the balance checked by hand.
Why tracks go wrong
The three most common reasons a garage door track bends or drifts out of line.
Impact
A car, a bike or a bin against the door or the track. The track takes the knock at the bottom, where it is easiest to hit, and a small dent there is enough to make the rollers catch every time they pass it.
Worn rollers
Rollers that have lost their bearings sit crooked in the track and cut into it. The track wears where they bind, and the bind gets worse. This is the slow version, and it is the one a tune-up prevents.
Loose brackets
Every cycle shakes the track a little. Over years the brackets that hold it to the wall loosen, the track drifts out of line, and the gap down one side of the door is the first thing you notice.
Roller replacement
Worn rollers and a bent track wear each other, so the technician checks every roller with the track. Rollers are sold per set.
Signs a roller has worn
Scraping or grinding as the door moves, or a catch at the same point every time. At the door, the technician looks for cracking, flat spots, worn bearings and damaged stems, then runs it to check each roller moves smoothly.
What it costs
Rollers are sold per set, fitted at the base labor rate, from $160 before parts. You get the figure at your house before any work starts. The $69 service call is waived when you go ahead with a repair (parts and labor).
Rollers on a tune-up
Rollers are one of the 17 points checked on a tune-up, so wear gets found before it damages the track.
“Jordan fixed our hanging door and other parts that kept the door off-balance. He did an excellent job as the door is now operating smoothly and quietly.”
“Arrived on time. Very professional. Fixed issue with my garage door track in same appointment. Also fixed manual door lock. Now it's doesn't bind as much, it's smoother and much quieter.”
E Sinclair · February 2026
“Best service ever!!! My garage door jumped track half way up and wouldn’t move. I called a couple of repair shops and never got a response. I then called Same Day. They came within two hours and had my door fully operational and even fully adjusted.”
Mickey Hansen · December 2025
“Our technician, Mike was amazing. He explained everything thoroughly, worked quickly and made sure we knew exactly what was happening the whole way. Highly recommend the Same Day team if you accidentally hit your garage door track (oops), or just need a really good tune up!”
Hannah Tooker · March 2026
Questions
Often, yes, if the bend is small and the steel has not creased. A kinked or creased section is replaced, because a straightened crease does not hold. The technician shows you which before quoting.
Usually both are part of it. Worn rollers cut into the track, and a bent track wears the rollers. The technician checks the whole run and quotes what has actually worn.
Not if it is scraping, catching or sitting crooked. That is how a door comes off its track, and a door off its track is a bigger job. Stop using it and book.
Labor starts at $160 before parts, and the $69 service call covers the diagnosis. The $69 service call is waived when you go ahead with a repair (parts and labor). Whether the track can be straightened or needs replacing decides the total, and you get the figure at your house before any work starts.
As fast as same day for qualifying services, Monday to Saturday. A door that will not close is treated as urgent. After hours, the honest answer is the next working morning.
Related pages
- Off-track doorsIf the door has already come off and is hanging or jammed part-open.Open the page
- Cable repairA cable is hanging loose, or the door came down crookedFrom $609.50 spring and cable
- MaintenanceRollers, brackets and track checked before they get to this point.17-point tune-up
- Garage door repairFor anything else the door is doing, and you cannot tell which part it is.$69 service call, waived with parts and labor
Door scraping or catching?
Call and tell us where it catches. Stopping now keeps it a track repair.
Phone calls answered 24/7. Booking available 24/7.


