Skip to content

Repair guides

Garage door repair guides rated by difficulty

Our technicians wrote these guides from the jobs they do. Each one lists the parts we use and the mistakes we see. Some repairs you can do yourself in an afternoon. One we tell you not to touch, and that guide explains exactly why.

For quick answers before you book, see the questions page. For routine checks and maintenance intervals, see resources. This page covers the repairs themselves.

Every guide has a difficulty rating

Each repair sits in one of three tiers. The tier depends on whether the job involves stored energy and whether stopping halfway can hurt you. Find your repair to see its rating before you read the guide.

Do it yourself

These jobs involve no stored energy and no special tools. If you can change a smoke alarm battery, you can do these.

  • Do it yourself

    Lubricate a garage door properly

    15 minutes · $12 of spray

    Coming soon

  • Do it yourself

    Test the auto-reverse safety feature

    5 minutes · free

    Coming soon

  • Do it yourself

    Clean and check the safety sensors

    10 minutes · free

    Coming soon

  • Do it yourself

    Reset a keypad you have lost the code to

    10 minutes · free

    Coming soon

Doable with care

These take real work, and it is possible to get them wrong. None of them can hurt you if you stop.

  • Doable with care

    Replace the bottom weather seal

    1 hour · $30 to $60

    Coming soon

  • Doable with care

    Replace worn rollers, bottom sections only

    1 hour · $25 to $70

    Coming soon

  • Doable with care

    Realign safety sensors that keep reversing the door

    30 minutes · free

    Coming soon

  • Doable with care

    Adjust the travel limits on an opener

    30 minutes · free

    Coming soon

Do not attempt

These jobs involve stored energy or suspended weight. Each guide explains what the job involves and why we do not recommend it.

Jobs in the third tier still get full guides. They answer the most searched question in this category, so each one covers what the job takes, what goes wrong, and why we do not recommend it.

Start here

What a torsion spring replacement involves

This guide explains what the job takes, why it is dangerous and what a technician does. It also points to what we charge, so you can decide with all the facts.

Tier
Do not attempt
Time
2 to 4 hours
Parts
$80 to $180
Tools
Winding bars, vice grips, socket set

Read the guide

Front view from inside. The springs sit on the shaft above the door, with a cable drum at each end.

When to stop and call us

Here are three things people often tell themselves. Each one has a mechanical reason to stop. In each guide, the point to stop is tied to something you can see on the door, not to the name of the job.

  • “The spring is only a bit unwound.”

    A spring holds the same energy at a quarter turn as it does at seven. There is no partially safe position.

  • “I can hold the door up while I work.”

    With the spring broken, a double door puts 150 to 200 pounds in your hands. That is too much weight to catch.

  • “I have the part, it is just fitting it.”

    Most problems come from torque and balance, not the part. A spring with the wrong rating fails again within a year, even when it is fitted correctly.

What a spring replacement costs

Here is a broken torsion spring, done by you or done by us. Doing it yourself costs less in parts, and you can check that figure with one search.

Row

You do it

We do it

Parts

$44 to $57 for a complete kit direct, $48 to $117 at the big-box retailers. Doing it yourself is clearly cheaper here.

Included in the job price. The spring is rated to your door, not chosen from what was on the shelf.

Tools you would have to buy

Winding bars, vice grips and a socket set. The bars must be solid steel and 18 inches or longer.

Nothing. The tools are on the truck, and the technician has wound several thousand springs.

Time

2 to 4 hours the first time. Longer if a cone is seized or the shaft has scored.

Usually under 90 minutes. Same day service on qualifying jobs.

If it goes wrong

In every documented injury from this job, the cause is a wound spring releasing. The injuries are to hands and eyes, in that order.

That is our responsibility, and our insurance.

If the wrong spring goes on

A spring with the wrong rating fails again within a year, even when fitted correctly. On a heavy door it can take the opener with it.

We measure the wire size, inside diameter and length. The cycle rating is on your invoice.

We checked retail parts and tool prices on 17 September 2026, and they change. Our figures come from our published price list.

Check the bar length if you buy a kit

At least one major retailer sells a pair of 16 inch winding rods described as meeting the residential standard. Clopay's own installation manual and the most detailed DIY guide in the trade both specify an 18 inch minimum. That means you can buy bars that are too short while believing they meet the standard.

See the full price list

Warning

Safety warning. Garage door springs, cables and bottom brackets are under extreme tension and can cause serious injury or death if they slip or break. This guide is general information only. If your repair involves springs, cables, or brackets, stop and call a licensed professional.

If you would rather not do this job yourself, call us. We will tell you the price before any work starts.

Call (480) 750-7975

Arizona does not require a license to replace a garage door spring, so it is worth checking who you hire. Our ROC numbers are 308754 and 349928, and you can look them up. Nothing on these pages is a warranty of the procedure on your own door.

Want us to do the repair?

Tell us what the door is doing. We will tell you what it needs and what it costs before anyone touches it.

Safety and disclaimer. The repair guides and DIY information on this website are provided by Same Day Garage Door Services for general informational purposes only. They are not a substitute for an in-person inspection by a trained, licensed technician, and they may not fit your door, opener or situation.

Garage doors are the largest moving object in most homes. Springs (torsion and extension), lift cables, drums and bottom brackets operate under extreme tension and can cause serious injury, death or property damage if handled incorrectly. We strongly recommend that only a trained professional repair, adjust or replace these parts. Before any work on or near an opener, disconnect power (unplug it or switch off its breaker) and secure all remotes and keypads. Use the emergency release only as described in your opener's manual, preferably with the door closed, and never when a spring or cable may be broken. Keep children and pets clear, and never let children play with remotes or wall buttons.

Test your opener's automatic reversing system and safety sensors monthly, following your manufacturer's instructions. Residential garage door openers are subject to federal entrapment-protection requirements (16 CFR Part 1211, which incorporates UL 325). If your door does not reverse when it contacts an object or when the sensor beam is blocked, stop using the opener until it is repaired.

If you choose to do any work yourself, you do so at your own risk. Same Day Garage Door Services makes no warranty, express or implied, about the accuracy, completeness or fitness of this information for any purpose, and is not responsible for any injury, loss or damage resulting from its use, to the fullest extent allowed by law. Following a guide may void your manufacturer's warranty. Nothing here creates a service agreement or warranty; our warranties apply only to work we perform, under the terms in your written invoice.

In Arizona, paid garage door installation and repair work generally requires a license from the Arizona Registrar of Contractors (verify any contractor at roc.az.gov). Same Day Garage Door Services, ROC 308754 (primary) and ROC 349928. Questions? Call (480) 750-7975 or visit our scheduling page.