
greater Phoenix metro
Get your garage door sensor repaired today
A door that starts to close and reverses is usually a dirty lens or a knocked bracket. Try the three checks below first, and call only if they do not fix it.
What Happened?
Please click for further details.
As fast as same day for qualifying services, Monday to Saturday.
- 5.0 on Google, across 5,400+ reviews
- 4.8 on Yelp
- Licensed, bonded and insured · AZ ROC 308754 and AZ ROC 349928
- 30,000+ jobs since 2016
Try this first
Three checks, in the order they usually work. Most people never get past the first one.
The sensors are the two small boxes near the floor, one on each side of the door. Check 1
Clean both lenses
Each sensor has a lens facing the other one. Wipe both lenses with a dry cloth. Dust and low winter sun are the most common reasons the door will not close.
Each sensor has a small light on it. Check 2
Check the lights
Each sensor has a small light. If both lights are on and steady, the sensors are lined up. If one is off or blinking, or one sensor shows a green light and the other a red or amber light, that sensor has been bumped. Gently move it until its light stays on.
The beam runs between the sensors, a few inches off the floor. Check 3
Look along the beam
The sensors send an invisible beam across the doorway a few inches off the floor. Anything in that line, like a trash can, a bike tire or a hose, stops the door from closing. Move it and try again.
If both lights are out, or the door still reverses with clean and aligned sensors, it is wiring or a failed sensor, and worth a call.
What it costs
$69
Service call
Charged when a technician is dispatched to diagnose. Waived when you go ahead with a repair (parts and labor). No charge on a warranty visit.
Alignment only
Covered by the $69 service call
A cloth and a nudge is an adjustment, so you pay the service call and nothing else.
A replacement sensor pair or a re-run of the wiring is quoted at your house, before anything is fitted. The $69 service call is waived when you go ahead with a repair (parts and labor). A fix as small as an alignment is covered by the $69 service call rather than adding to it.
How the repair works

Step 1
Call or book
Tell us what it is doing and what it sounds like. Phone calls answered 24/7. If we miss you during service hours, we call back in under 10 minutes.

Step 2
Beam and wiring tested
Alignment, lens, voltage at each sensor and the wiring run back to the head unit, in that order.

Step 3
Replaced and tested
New pair fitted where a sensor has failed, brackets set square, and the safety reverse tested before we leave.
Why sensors fail
Each safety sensor is one of the two small boxes near the floor, one on each side of the door. These are the three most common reasons they stop working, and you can fix two of them yourself in a couple of minutes.
Knocked brackets
The sensors sit six inches off the floor at the end of each track, which is exactly where a bike pedal, a bin or a reversing tire finds them. They do not have to move far: a couple of degrees is enough to lose the beam, and the give-away is one light flickering rather than holding steady.
Dust and sun glare
This is the genuinely local one. Valley dust films the lens over a season, and low winter sun coming straight into the receiving sensor reads as a broken beam, which is why a door can work all summer and fail every afternoon in January. A cloth fixes the first. Shading or moving that sensor fixes the second.
Wiring damage
The runs are usually stapled along the track and up to the head unit, where staples work loose, insulation goes brittle in the heat, and rodents find the wire. Both lights out at once points here rather than at alignment, and it is the one case on this page that is not a two-minute job.
“Jeff B came out today and helped with a nagging sensor problem where my garage wouldn’t close without holding the button. He identified and resolved the problem quickly for a fair price.”
“Had a delivery today and they broke the sensor on the garage door so it wouldn't shut. I called Same Day and they sent Mike out an hour later. Mike was friendly and efficient and everything is working perfectly again! I will definitely call them for any future garage door stuff!”
Chad Jones · February 2025
“Same Day Garage Door Services did an excellent job replacing our garage door spring and repairing the photo cell sensors. Trey, their technician, was professional, knowledgeable, and task oriented. He explained the problem and solutions in layman terms. Hopefully we won’t have anymore garage door issues, but if we do we would certainly use this company again. We highly recommend Same Day Garage Door Services.”
Carroll Barnes · March 2026
“Jordan G was our service rep and arrived early for the service requested. Explained to us what the issue was and efficiently fixed the issue with the motion sensors. Very professional and helpful. Spent time going over other potential issues and how to resolve motion sensors issue should it happen in the future.”
Peter Dillon · September 2025
Questions
Because the two sensors cannot see each other. A filmed lens, a bracket knocked a couple of degrees, or sun straight into the receiver all read the same to the opener as an obstruction.
No, and we will not do it. Safety sensors have been required on every opener sold since 1993 and they are what stops a closing door on a child or a pet. An opener running without them is not compliant and is not safe.
Usually, and it is a recommendation rather than a rule. They are a matched pair of the same age, and replacing one often means a second visit inside the year. You can decline it.
Not if we are already at your house for something else. If the visit was booked for the sensors and the fix is a nudge and a cloth, you pay the service call and nothing more.
Often the same day for qualifying jobs, Monday to Saturday, depending on where you are and what is already booked.
Related pages
- Opener repairIf the door reverses without the sensors being involved, the fault is the opener.From $160
- MaintenanceA 17-point tune-up checks the safety reverse along with everything else.Open the page
- Garage door repairFor anything the three checks above did not explain.$69 service call, waived with parts and labor
Still reversing?
If the lenses are clean, both lights are steady and nothing is in the path, it is wiring or a failed sensor. That one is ours.
Phone calls answered 24/7. Booking available 24/7.


