Do not attempt
What a torsion spring replacement involves
This guide explains the job: what a torsion spring does, why replacing one is dangerous and what a technician does. It is not a set of instructions. We do not recommend doing this job at home.
Warning
Safety warning. Garage door springs, cables and bottom brackets are under extreme tension and can cause serious injury or death if they slip or break. This guide is general information only. If your repair involves springs, cables, or brackets, stop and call a licensed professional.
The part
What a torsion spring does
A torsion spring is the part that lifts your garage door. It sits on a metal shaft above the door, with a cable drum at each end and a lift cable running down each side.
The spring uses a twisting motion to store and release energy, and it counterbalances the door. That is why the opener is only built to move a balanced door: it guides the door, and the spring carries the weight.
A standard spring is rated for about 10,000 cycles, roughly seven years at four trips a day. The springs we fit are rated for 20,000 to 30,000 cycles.
Front view from inside. The springs sit on the shaft above the door, with a cable drum at each end.
The risk
Why replacing one is dangerous
A spring that is holding up a door is under load whether the door is open or closed. A wound torsion spring stores enough energy to throw a winding bar out of your hands, and one slip can mean a trip to the emergency room.
The door adds a second danger. With the spring gone, you are holding the door's full weight, over 200 pounds on a double. If it slips, it drops with nothing to stop it.
The record backs this up. A 2023 case series from Massachusetts Eye and Ear describes seven patients hurt when a spring came loose at high speed during a home repair. DASMA, the door industry's trade association, says spring systems should be repaired only by trained professionals. The sources are on our DIY comparison.
Three things people tell themselves
“The spring is only a bit unwound.”
A spring holds the same energy at a quarter turn as it does at seven. There is no partially safe position.
“I can hold the door up while I work.”
With the spring broken, a double door puts 150 to 200 pounds in your hands. That is too much weight to catch.
“I have the part, it is just fitting it.”
Most problems come from torque and balance, not the part. A spring with the wrong rating fails again within a year, even when it is fitted correctly.
The job
What a technician does
Here is the job at a high level. On a door with two springs, we replace both together. Most common repairs take under 2 hours on site.
Step 1
Quote
The technician looks at the spring and the door, and gives you the price before anything is started.
Step 2
Match
They measure the wire size, inside diameter and length of the spring. A spring with the wrong rating fails again within a year, even when it is fitted correctly.
Step 3
Replace
The new spring goes on with the right tools and training. This step holds the danger, and it is the step this guide does not describe.
Step 4
Balance
The door is balanced by hand and the opener force is reset before the technician leaves.
The tools
The tools are a reason to stop
The job needs solid steel winding bars at least 18 inches long, vice grips and a socket set. Clopay's own instructions say never to use substitutes for the bars. If you do not own the right tools, that is your answer.
Buying them does not settle it. At least one major retailer sells a pair of 16 inch winding rods described as meeting the residential standard, so you can buy bars that are too short while believing they are right. A bar that slips can spin the cone with enough force to break bones.
Our technicians bring the right tools on the truck.
The signs
Signs a spring needs replacing
- The door suddenly will not lift, or feels far too heavy.
- The door lifts a few inches and stops.
- A cable hangs loose beside the track.
- The door sits crooked in the opening.
Many people never hear a spring go. If you suspect one has, stop using the opener, do not try to lift the door by hand, and leave the door closed if you can. Our spring repair page covers what happens next.
The cost
What a replacement costs
On our price list, a single torsion spring starts at $286.20 + $160 labor ($446.20 in all). A double starts at $572.40 + $160 labor ($732.40 in all). The $69 service call is waived when you go ahead with a repair (parts and labor). We tell you the price before any work starts.
Want us to do the repair?
Tell us what the door is doing. We will tell you what it needs and what it costs before anyone touches it.
Safety and disclaimer. The repair guides and DIY information on this website are provided by Same Day Garage Door Services for general informational purposes only. They are not a substitute for an in-person inspection by a trained, licensed technician, and they may not fit your door, opener or situation.
Garage doors are the largest moving object in most homes. Springs (torsion and extension), lift cables, drums and bottom brackets operate under extreme tension and can cause serious injury, death or property damage if handled incorrectly. We strongly recommend that only a trained professional repair, adjust or replace these parts. Before any work on or near an opener, disconnect power (unplug it or switch off its breaker) and secure all remotes and keypads. Use the emergency release only as described in your opener's manual, preferably with the door closed, and never when a spring or cable may be broken. Keep children and pets clear, and never let children play with remotes or wall buttons.
Test your opener's automatic reversing system and safety sensors monthly, following your manufacturer's instructions. Residential garage door openers are subject to federal entrapment-protection requirements (16 CFR Part 1211, which incorporates UL 325). If your door does not reverse when it contacts an object or when the sensor beam is blocked, stop using the opener until it is repaired.
If you choose to do any work yourself, you do so at your own risk. Same Day Garage Door Services makes no warranty, express or implied, about the accuracy, completeness or fitness of this information for any purpose, and is not responsible for any injury, loss or damage resulting from its use, to the fullest extent allowed by law. Following a guide may void your manufacturer's warranty. Nothing here creates a service agreement or warranty; our warranties apply only to work we perform, under the terms in your written invoice.
In Arizona, paid garage door installation and repair work generally requires a license from the Arizona Registrar of Contractors (verify any contractor at roc.az.gov). Same Day Garage Door Services, ROC 308754 (primary) and ROC 349928. Questions? Call (480) 750-7975 or visit our scheduling page.

